THIS REPLACEMENT BOLT WILL REPLACE YOU OLD WORN OUT OR BROKEN CHUTE BOLT
FIRST SAW THE OLD BOLT OFF AS CLOSE TO THE CHUTE AS POSSIABLE NOW DRIVE THE REMAINING PART OF THE BOLT THRU THE CHUTE WE SHOOT SOME POLY SEAM SEAL DOWN IN THE HOLE SO THE REMAINING BOLT DOES NOT RATTLE AROUND.
NOW THREAD THE HOLE WITH A 7/16-20 TAP.
JAM THE TWO HEX NUTS INTO THE LONG THREADED END OF THE NEW STUD AND USE THEM TO INSTALL THE STUD INTO THE NEWLY THREADED HOLE.
YOU ARE READY TO GO BACK TO WORK AND HAVE SAVED AT LEAST 200.00 BUCKS
