Header Graphic
OLDHOBARTSLICERPARTS.COM
Guest Book
COMMENTS FROM CUSTOMERS

Add Comment

Tim on June 2, 2016 at 5:41 PM said:

In search of a old style split back bearing support for A Hobart 200A mixer

Email me at v1av8@hotmail.com
Richard Nadon on January 15, 2016 at 5:57 PM said:

re missing a part on the tray We are not sure what it is supposed to look like. Do you have any pictures of what both sides of the slicer should look like?
sheltucky's smoke house BBQ&Sausage on January 23, 2015 at 1:35 PM said:

Its great to find a web site I can get what I need and if I run into trouble its a phone call away I like!!!
France Thibault on August 13, 2014 at 6:53 AM said:

HI, Would appreciate your expertise on the value of a meat slicer that looks like the model 410 perfect condition.
ken on August 7, 2014 at 6:40 PM said:

I have a model 110 that I have hade for over 30 years and it still works great the power cord is starting to show some wear but the slicer works great
candyallgood@yahoo.com on January 9, 2014 at 8:46 AM said:

iwould like to know more about my mixer.ita a oldermodle A-200.the serial no-1489049.it run but would like toknow where to oil it.and i love this sites.
George on October 20, 2013 at 3:57 AM said:

Looking for motor or pan switch for model 75 slicer any help would appreciated.
Phil Skochilich on August 4, 2013 at 8:36 AM said:

I bought a New Hobart sharpener from Hobart $395, then I checked with you guys $99. Next time I know where to go!
Phil
Craig on April 25, 2013 at 7:10 AM said:

I recently just purchased I Hobart 411 meat slicer. I looks as if was painted a couple times over. I was going to scrape to paint off, but wasn't sure if it was the original paint. Also I am looking for someway to polish up the metal if I stip the paint.
Marlene Courter on April 23, 2013 at 4:29 PM said:

Desperatly looking for the rubber blade drive.It is a rubber coupling of sorts on the end of the motor shaft that drives the blade. i have a old globe slicer it is red porcelain serial # 63894. we love it and use it constantly. any help please email me at courterm@live.com
Denny on January 19, 2013 at 1:56 PM said:

Purchased a new power cord and on/off toggle switch for my model 410 Hobart slicer. I visited the store to p/u the parts personally. The staff was very friendly and helpful. I now need a new sharpener assembly, I have no doubt I will be purchasing it from Treasure Coast. Thanks!
Todd on December 8, 2012 at 5:16 AM said:

Purchased a rear deflector for my vintage 110 after finally finding your web site. So happy to get the restoration under way! Still looking for a meat grip for the carriage assembly though. Will check back often! Thanks again!

toddrist@hotmail.com
Ken on November 27, 2012 at 1:37 PM said:

I repair restaurant equipment for a living, and a customer just told me about this site. I like what I see - I'll be back!
Michael Bennage on October 13, 2012 at 3:04 PM said:

I have Hobart model 84142 / serial 1947794. When turned on shaft turns about 1/8 then stops and unit hums, something binding. Turn unit off and rotate shaft back and it does the same. I thank you for the parts break down list and allowing it to be saved. I have searched for some trouble shooting tips but have had no luck so far. Any suggestions would be greatly appreciated. Again I thank you for putting this information out for others.

Best Regards,
Michael Bennage
Phyllis on August 21, 2012 at 4:58 PM said:

Hello I have a globe slicing machine 150 that belonged to my father. He had a combination deli/candy store in brooklyn from the late 40's to the early 60's. I would like to sell this machine - anyone interested. The machine survived a fire and I had it totally restored in the 90's. Please contact me at phager12@gmail.com

Add Comment

OLD HOBART SLICER PARTS  E-MAIL treasurecoastfmp@gmail.com

We have no affilation with Hobart Corp.